dubas engineering pvt ltd

UPS Systems

DC Systems

Frequency Converters

STAT COM Products

Voltage Stabilizer

Transformers

Invertors

Special Products

Products

MX Series

dubasDC

MX Series is the most advanced current technology battery chargers offered by Dubas. The systems are available up to 1500 Amps rating at various voltages. MX series is a IGBT based PWM converter with fully digital control using DSPs. The system has microcontroller based diagnostics and monitoring facilities for all requisite diagnostics, monitoring and system communications. MX series provides excellent performance features and user benefits and are extremely reliable systems for all critical online applications like process industries, Oil and Gas installations ,power plants and any kind of utility DC application needs.

SALIENT FEATURES

Fully digital System With DSP Controller

IGBT Based PWM converter

Input PF near unity

Input Current Harmonics < 4%

Excellent Transient Response & Recovery.

Optional Static Bypass Switch

Advance Battery Charging Management

High Diagnostics and Monitoring Facility

Optional SNMP / Remote Monitoring Features

Float/ Float cum Boost/Application specific configuration

Compatibility to all types of batteries (LA/VRLA/NiCad/Plante)

Versatile to handle complex loads

Applications
	Switchgear tripping
	Water Supply Systems
	Oil & Gas industries
	Power Plant Applications (generation, transmission and distribution)
	Oil and Gas Pipeline Cathodic protection systems
	Telecommunication
	Any critical DC requirements

Product Range
	24V/48V/110V/220V/ 500VDC
	10amps to 1500amps

Configurations
	FC/FCBC/REDUNDANT or any customer specific configurations
	Battery Combinations: SMF/VRLA/Tubular/Ni CD/Plante

Advantages

PWM technology

The MX-Series employs most advanced PWM rectifier technology using IGBTs as switching devices.

Digital control

MX-Series employs fully digital control with DSP controller which provides predictive control of rectification and monitoring capability.

Input Power Factor Controller

MX-Series offers a builtin input power factor controller (PFC) which improves the input PF to near unity (> 0.99). Conventional thyristor based DC systems provide input PF as low as 0.6. The PFC of MX offers several adventages to the user, these are listed after the following paragraph.

Input Current Harmonics

MX-Series DC systems / Battery Chargers inject very low harmonic currents back in to the source. This input current harmonics is limited to less than 5% and can even be brought down to < 3% if desired in MX –Series. Conventional thyristor based chargers pump as high as 50% harmonics current to the source. This harmonic pollution causes various problems to the customers. MX-Series with input PFC and Harmonic limiting technology has following specific advantages.

	Reduces the current consumption and saves energy. This is an important factor in a plant’s energy management. Tariff and maximum demand charges also comes down.
	Reduces standby generator capacity requirement : Conventional thyristor based DC systems / Battery Chargers demand standby generators of nearly 200% plus capacity (two times the DC system rating) to compensate for low input PF and high input harmonics. MX-Series require just 120% of the DC systems capacity (20% more than DC system rating).
	Avoiding over heating of all upstream and down stream current carrying cables and components in the distribution systems.
	Reduces the wear and tear of all components / equipments connected in the same power source and hence avoids pre-matured ageing of such components / equipments. Ex. a motor connected with the same source with thyristor based charger will have high wear and tear on the motor winding through a period of time and can cause premature ageing of the motor and sudden failure.
	Avoids stray tripping of breakers and protection relays.
	Ensures optimum utilization of power source, as reactive power is brought down to very low values by improving PF and by reducing harmonics.
	Avoids flickers, sags and surges in the distribution network.

Excellent Battery Management

MX systems with high frequency PWM switching and digital control offers very low ripple into the batteries and specified voltage and current to the battery depending on the battery demands to charge the battery optimally. This enhances the battery life considerably.

Flexible Configurations

MX-Series can be configured in various configurations to suit applications like Float Chargers, Float Cum Boost Chargers, Redundancy Options or simple DC systems etc., MX can be built to support all kinds of batteries like Tubular Lead Acid, VRLA, Nickle Cadmium, Plante etc.,

Diagnostics & Monitoring

MX Series has a processor based diagnostics with touchpad facility for human machine interface. All specified parameters can be monitored and even can be programmed into the systems,on the field. RS232 / RS485 ports are available for computer interface. Voltage free contacts can be provided for user purposes. Customer specific front display can be incorporated suit applications.

Major Approvals

Dubas DC systems are approved and accepted by major consultants, EPC contractors and users across all application segments and markets.

Consultants	EPC Contracting Companies	Major Users
Engineers India Ltd	ABB	HPCL / BPCL / ONGC/ IOCL
MECON	SIEMENS	NTPC / PGCIL / State Power Generation/Transmission Cos
TATA Consulting Engineers	AREVA	Nuclear Power Corporation
M N Dastur	L & T	Bhabha Atomic Research Centre
FITCHNER	EMCO	Nyveli Lignite Corporation
Tokyo Engineering Consultants, Japan	TECHNIP	Volta River Authority Ghana
Jacobs	BHEL	Lloyd Steel
Chemtex	Honeywell Automating India Ltd	Italia Cements
GAIL	Crompton Greaves	Ethiopian Electric Power Corp.
Udhe	IOTL	Ghana Electricity Authority
Holtec (I) Ltd.		GAIL
		Hindustan Oil Exploration Company
		Thysserkrup